Descriere

Cititorul TSL 1067 asigura Motorola MC70, MC75 si MC75A cu consola pentru LF duala la 125kHz si 134,2kHz. Cititorul RFID LF este alimentat de la terminalul Motorola si contine atat cititorul RFID cat si antena. Motorola MC70/75/75A retin functionalitatea originala de cititor laser de coduri de bare precum si platforma originala de comunicatii inclusa in terminal.

Cititorul RFID LF asigura abilitatea de a citi si scrie pe o mare varietate de transpondere specifice, incluzand NXP (Philips) HITAG, EM Microelectronic si Texa Instruments.

Specificatii

Caracteristici de performanta

• Frecventa transmitere RF: 125kHz, 134.2kHz
• Standarde RFID acceptate: ISO 11784, ISO 11785, ISO 18000-2
• Supported Tag-ICs : NXP HITAG 1, HITAG 2, HITAG S;    Sokymat Q5;     EM Microelectronics EM4x02, EM4x05 (ISO FDX B), EM4x50;     Texas Instruments 64bit Read Only, 64bit Read Write, 1088bit Multipage
• Timp tipic de citire (numai numar serial): HITAG 2 – 30ms; HITAG S – 59ms; EM4002 – 65ms; EM4005 – 58ms; EM4050 – 95ms; Texas Instruments – 93ms
• Interfata gazda: Serial interface on COM1 of MC70, ASCII or Binary Protocols 9600bit/s to 115200bit/s 8,N,1.
• Distanta citire: Depinde de tipul transponderului si a antenei. Typically up to 8cm for Texas Instruments 32mm glass, up to 7cm for EM4102 50mm disc.
• Consum curent: Typically 50mA whilst active (dependent on transponder types); 0mA in shutdown mode

Indicatori utilizatori

• LED rosu, verde: Avertizare ce indica activitatea (functia poate fi personalizata)
  

Interfete conectare

• Interfata fizica: USB and power in to charge MC70/75/75A
• Reader power supply: Powered from host terminal
• ActiveSync: via USB

Caracteristici fizice

• Dimensiuni: 90×82×32mm 
• Greutate: 95g
• Materiale incluse: Polycarbonate
• Culoare: Grey
• Materiale finisaj: FinishSparked Surface
• Atasament mecanic:  Snap-on action with optional locking screws
• Cuplare: Atasamentul mentine cuplarea cu Motorola pentru incarcare si ActiveSync

Mediu

• Temperatura operare: -10°C to +50°C 
• Temperatura depozitare: -40°C to +60°C 
• Umiditate: Up to 90% Relative humidity Non Condensing
• Specificatii cadere: 1.3m (4.26ft) to concrete, 6 drops per 6 sides over operating temperature; 1.5m (5ft) to concrete, 2 drops per 6 sides at ambient temperature 23ºC (73ºF)
• Etanseizare mediu: Internal components conformal coated
• Descarcare electrostatica: +/-15kV air discharge, +/-8kV direct discharge
• Constructie: conform RoHS

Norme

• EMI/RFI: TBA
• Electrical Safety: TBA